SIZE146 cm (57.5")
RESOLUTION3840 x 2160 (16:9 aspect ratio)
DISPLAY COLORS8-bit colors: 16.77 million colors
The 58 inch viewing area of LS580W enables a new dimension in medical imaging allowing high flexibility in arranging different screen layouts. Important pictures can be scaled to the desired size, less important information can be moved out of the focus. The LS580W supports life time luminance stability. Its tone curves match DICOM/CIE recommendations. The monitor can be mounted to ceiling suspensions and is ideal for operating rooms where multiple medical images need to be displayed simultaneously.
Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.
Wide viewing angles allow the monitor to be viewed from the side with minimal color shift, thus offering a quality image to multiple persons watching from different perspectives simultaneously.
EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.
Monitor calibration can be carried out to maintain DICOM Part 14 compliance for rendering consistency over time.
Redundant power supplies and backlights as well as two DVI inputs give the monitor a high degree of operational reliability for creating a fail-safe environment. A monitoring function can be configured to notify the X-ray system in the event operating conditions become critical or a component fails.
With images displayed on the screen in real time, time critical aspects of image distribution are addressed to ensure e.g. safe catheter localization during insertion into an artery.
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.
The monitor is equipped with two independent LED backlights that offer a significantly longer service life over conventional CCFL backlights. In addition, you can maintain high brightness while simultaneously lowering power consumption. Since the LED backlights are mercury-free, they will also reduce any potential impact on the environment when they are disposed of.
VESA compliance to be attached to existing mounting accessories.
The monitor meets the strictest medical, safety, and EMC emission standards.
Certifications & Standards (Please contact EIZO for the latest information.) | CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, GB4943.1 (non-tropical, altitude<2000 m), UL60601-1, FCC-B, RCM, RoHS, China RoHS, WEEE, CCC |
---|---|
Supplied Accessories | AC power cord, dual link signal cable (DVI-D - DVI-D) x 2, Utility Disk (PDF Instructions for Use) |
Type | Color TFT LCD Panel (VA) |
Backlight | LED |
Size | 146 cm / 57.5" (1,460 mm diagonal) |
Native Resolution | 3840 x 2160 (16:9 aspect ratio) |
Viewable Image Size (H x V) | 1270.0 x 721.0 mm |
Pixel Pitch | 0.331 x 0.334 mm |
Display Colors | 8-bit colors: 16.77 million colors |
Viewing Angles (H / V, typical) | 176° / 176° |
Brightness (typical) | 700 cd/㎡ |
Recommended Brightness for Calibration | 350 cd/㎡ |
Contrast Ratio (typical) | 4000:1 |
Response Time (typical) | 9.5 ms (Midtone) |
Input Terminals | DVI-D (dual link) x 2 |
Digital Scanning Frequency (H / V) | 131.3 kHz / 59.7 - 60.3 Hz |
Power Requirements | AC 100 - 240 V: 50 / 60 Hz |
Maximum Power Consumption | 400 W |
Power Save Mode | Less than 38 W |
Power Management | DVI DMPM |
Degree of Protection | IP20 |
Net Weight (Without Stand) | 47 kg |
Hole Spacing (VESA Standard) | 400 x 400 mm, M8, depth 16 - 20 mm |